Matching model names and certificate identifiers in public procurement deliveries

5 min read

When delivering equipment such as breathalyzers or alcohol interlocks to a public agency, confirming that the certificates required by the contract and specifications and the actual equipment refer to the same item is a basic part of acceptance inspection. A certificate here means a document showing the subject and results of testing, calibration, or similar work; the model name indicates the type of product, and the serial number distinguishes one individual unit. Even units of the same model are different physical items if their serial numbers differ.

An interlock in particular is an alcohol interlock that controls whether a vehicle can start based on breath test results and other inputs. How you verify things also differs depending on whether the delivery requirements call for model-level documents or documents for each individual unit delivered. The key is not to match the number of documents. It is to clearly record how the delivery list, the markings on the physical unit, and the subject information on the certificates relate, so the inspector can judge that they are the same items.

The same model name does not mean the same unit

The model name is the first clue for confirming the product family, but it is not information that identifies an individual unit. For example, even if the delivery list shows 10 units of a particular model and 10 certificates are attached, if one of the serial numbers on the certificates belongs to a different unit, the quantities match but the link is broken. You cannot treat a document as belonging to a delivered item just because the model name is the same.

First, read in the contract and specifications what the certificates must prove. The basis for comparison differs depending on whether a document is a test result for a model or type, or a calibration or test result for an individual unit with a serial number. If the document covers an individual unit, compare the serial numbers on the unit and the document; if it is a model-level document, an appropriate approach is to note separately on the list that the document does not directly prove the individual delivered item.

Distinguish three kinds of numbers in one list

During inspection, the unit's own serial number, the certificate number, and the management number on the contract or delivery list are easily mixed up. Because the three numbers serve different purposes, it is better to put them in separate fields than to list them in the same column. That reduces the chance of misreading a certificate number as a unit serial number or ending the physical check after looking only at an internal management number.

What to check Information to record on the list Why compare it
Actual delivered unit Model name, unit serial number, quantity delivered To identify the items that arrived on site
Original certificate Certificate number, the model name and serial number the document refers to, scope of testing or calibration To confirm what subject the document covers
Contractual configuration Options, components delivered with the unit, required document types To find differences between document scope and delivery scope
Discrepancies Date found, what differs, result of the request for confirmation To keep the basis for judgments before and after correction

When options or software versions are part of the contractual requirements, the model name and serial number may not be enough. However, the fact that a certificate does not state that configuration does not immediately mean nonconformity. You need to separate whether the contract requires that configuration to be confirmed on the certificate or allows it to be confirmed with separate manufacturer materials or a delivery specification.

A comparison sequence in a hypothetical delivery

For instance, suppose an agency receives 10 breathalyzers of the same model and requires 10 individual-unit documents. The person in charge copies the 10 serial numbers from the physical units onto the delivery list and compares them line by line with the subject numbers on the certificates. If the ninth certificate shows a number that is not on the delivery list, the observed fact is that "there are 10 documents, but one is not linked to a specific physical unit."

This difference could be a simple typo, or the certificate for another unit may have been mixed in. So a possible action is to ask the supplier to confirm it, based on the original certificate and the identification of the unit in question. If a correction document from the issuer confirms it was a clerical error, keep the original document's number, the corrected version, and the reason for the change together. If it turns out to be another unit's document, you need to obtain new documents for the unit in question.

The completion criterion in this case is not "we have collected 10 certificates." It is a state where each delivered unit's serial number is linked to the required documents without gaps and the list distinguishes model-level documents from individual-unit documents. If the subject information for one unit is still being checked, it is better to record that unit's correction status clearly than to mark the whole set as complete.

Do not resolve discrepancies by editing the original

If staff change numbers or model names directly in a certificate file, it becomes hard to know who changed what on what basis. If a typo in a document is suspected, you need to obtain a document officially corrected by the issuer or supplier. When you receive a corrected version, rather than deleting the old one and erasing the trail, link which document replaced which and for what reason, so you can explain the path of judgment in later inspections or audits.

Even when the marking on a unit is faint or the unit number is hard to read, it is important not to enter a guessed number. You can collect materials that identify the actual item, such as packaging labels at the time of delivery, the delivery specification, and confirmation from the supplier. If it turns out the unit was replaced, do not automatically attach the previous unit's certificate to the new unit; compare again, against the contract requirements, which documents the replacement needs.

Inspection records must let the next person retrace the steps

An inspection list for a public delivery is not a memo to aid one person's memory but a working record that lets the relationship between items and documents be checked again. If you record, for each unit row, the physical serial number, the related certificate number, the subject information on the document, and whether there is a difference, the person accepting the delivery or later maintenance staff can compare along the same path.

Certificates for past deliveries or other models can be reference material for gauging the required level, but they do not become proof for the items delivered now. DATECH's official download page also provides product-specific user manuals and KOLAS calibration application documents as separate items. Distinguishing from the start the types and scope of documents needed, and managing them together with the actual delivery list, reduces inspection confusion caused by relying on a matching model name alone.

※ This article provides general information and is not legal advice for any specific case. Consult a lawyer or other professional about your specific situation. Laws may be amended, so check the latest version at the Korea Law Information Center.

References

#public procurement
#delivery inspection
#serial numbers
#test certificates
Considering our products?
We'll help you decide.