Symptom records to keep when errors repeat during the breath sample

6 min read

Safety managers and equipment staff who operate breathalyzers may encounter situations where an error appears on screen or the test stops while the person being tested is blowing into the device. At that point, it is hard to say right away whether the error is caused by a device fault or is related to preparation for use. Even if you ask for inspection or repair, an explanation like "the test didn't work" alone makes it hard to look back at the moment the error occurred.

A record of errors during the breath sample is a different document from a calibration certificate or a repair report. Calibration is the work of establishing the relationship between the values provided by measurement standards under set conditions and the device's indicated values, and it is distinct from adjustment, which changes the device so that it produces set indications. A symptom record, on the other hand, documents at which stage the device stopped during actual use and what appeared on the screen. To report repeated errors accurately, the order of events and the facts you checked must come before guesses about the cause.

First separate where in the breath process it stopped

Record separately whether the error occurred before the test started, right after the person began blowing, while they were continuing to blow, or before or after the result was displayed once blowing ended. Recording the order you observed, such as which guidance screen appeared after pressing the start button and how far the breath had progressed when the screen changed, helps the people doing the inspection narrow down what to check.

Record on-screen messages, symbols, numbers, and warning tones exactly as they appear, as far as possible. If you change them from memory into error names from another model, or write an interpretation such as "sensor fault," the record can end up differing from the actual display. The meaning of an error message and how to respond to it should be read from the user guidance for the exact model in use.

If there were several failures, do not simply add up the count. If the first attempt had an error during the breath and the next attempt showed a warning before starting, the two should be recorded as cases occurring at different stages. Conversely, if the same screen indication followed at the same stage, you can group them by time of occurrence to show how the repetition progressed.

Record the screen display together with the configuration used

Information that identifies the device is as important as the symptoms. Record the model name and the device's identification number, and note the result of checking whether the designated mouthpiece for that device was used. Rather than writing unchecked items as normal, marking them as "not checked" lets you fill in missing information in later inquiries.

Item to record How to write it factually Wording mixed with assumptions
Stage of error Before the test started, during the breath, before or after result display once the breath ended The test didn't work
Screen and sound Displayed message or symbol, whether there was a warning tone, order in which they appeared Looks like a sensor error
Configuration at the time Model name, device identification number, whether the designated mouthpiece was confirmed The accessories we usually use
Checks just before Preparation items actually checked within the scope of the user guidance, and the results Action completed

If you know whether the device had just been moved or was being used again after a long period of storage, you can add that. However, these conditions are only information describing the situation at the time, not grounds for determining the cause. The purpose of the record is not to judge the breathing ability of the person tested or a defect in a particular part, but to reconstruct the scene of use at the time as far as possible.

A hypothetical case separates observation from interpretation

For instance, suppose that on a device used for testing before entry to a worksite, one person began blowing as instructed, a particular message appeared on screen, and no result was shown. The observation to record could be written as: "Around 8 a.m., began blowing after the test start guidance; during the breath a particular message appeared on screen and no result was displayed." Whether the same message appeared at the same stage in other attempts, or whether a different warning appeared before starting, should be recorded as separate items.

This observation alone cannot distinguish between a problem inside the device and a problem with preparation. A possible action is to check the preparation steps allowed in that model's user guidance and record whether the designated accessories were used and the results of the checks. Trying to reproduce the error by internal adjustment, disassembly, or introducing substances not in the manual is not an action for keeping symptom records.

The completion criterion in this case is not declaring that the error has gone away. The record is complete when the device identification, time of occurrence, stage of failure, actual screen display, configuration used, and checks performed are gathered so they can be passed on with an inspection or repair inquiry. If the error does not appear afterward, also record separately after which checks use was resumed, so it does not get mixed up with the earlier symptoms.

Do not treat calibration history and the current error as the same thing

Having a repeated error does not mean calibration alone will solve it. Calibration deals with the relationship between measurement standards and the device's indicated values, while a test stopping during the breath may need a separate inspection or repair check. Conversely, the fact that the next calibration date has not yet arrived cannot explain away or dismiss an error occurring now.

When you inquire about outside inspection or repair, if you have the dates and result documents of the most recent calibration or repair, you can consider passing them on together with this symptom record. That allows what work was done before and what error is recurring now to be examined separately. Whether power supplies or integration accessories need to be sent along should not be decided arbitrarily; check what the intake guidance requires and prepare accordingly.

The manufacturer's download page may post product-specific user manuals and guidance on calibration and repair. Guidance can differ by model even within the same product family, so when looking for materials or making an inquiry, it is better to give the model name, the device identification number, and the actual screen message together. If it is unclear whether a document fits the current device, rather than applying guidance for an older or different model, organize the questions to be confirmed and pass them on.

After inspection, record reproduction results and usage status separately

When you get the device back after inspection or repair, keep separate records of whether the earlier error was reproduced during inspection and what checks were carried out. If the same symptom was not reproduced, it is more accurate to record "the earlier symptom was not reproduced during inspection" rather than writing a broad "confirmed normal." This wording becomes a reference for comparison if the same phenomenon occurs again on site later.

At sites where several staff members hand the device over to one another, you can suggest managing the symptom record and the handling results as one bundle. This lets the next person know specifically whether the device is waiting for repair intake, has finished inspection and can be used, or needs further observation. With this distinction, you can manage the device without mixing up duplicate submissions for the same error and newly occurring errors.

For errors that repeat during the breath sample, a record with the stage of occurrence and the actual screen display is more useful than lengthy guesses. If you record observed facts, actions actually checked, and items not yet checked separately, you can organize the next steps without confusing calibration history with the need for repair.

References

#user manual
#breath sample error
#symptom log
#breathalyzer repair
Considering our products?
We'll help you decide.