페이지 정보

작성자 DATECH 댓글 0건 조회 259회 작성일 23-04-04 11:49

본문

AF-i1

Ignition Interlock Device

Equipped with a premium Fuel Cell Sensor, the ALCOFIND AF-i1 is designed to inhibit drunk driving by preventing the engine from starting if it exceeds a specified level after checking the driver's alcohol level.

System Diagram

Contents

- ALCOFIND AF-i1 handset

- ALCOFIND AF-i1 control box

- ALCOFIND PC-software

- RJ-45 cable

- Installation wire x 11

- Handset cradle

- Mouthpiece x 10

- Instruction manual

Key Features

- Premium fuel cell sensor

- Advanced features to prevent circumvention

  (Sense the temperature, humidity, flow rate, and air volume of breath sample to prevent the manipulation)

  (Sense the vehicle engine to prevent the start of vehicle without an accepted test)

  (Sense the vehicle voltage to prevent the removal of Interlock system from the vehicle)

- Service and calibration reminder

- Store around 500,000 events with date and time

  (The every relevant events that the driver uses with the vehicle are recorded in both of handset and control box)

- Manage and download data, and adjust operation settings through the ALCOFIND software

- Working under extreme conditions

Specification

Measurement range 0.000 ~ 0.500 %BAC
0.00 ~ 5.00 ‰
0.00 ~ 2.50 mg/L
Sensor Premium Fuel Cell Sensor
Accuracy ±0.005 %BAC (at 0.100 %BAC, at 25 ℃)
±0.05 ‰ (at 1.00 ‰, at 25 ℃)
±0.025 mg/L (at 0.50 mg/L, at 25 ℃)
Ready to test 25 ℃ : approx. 1 s
-20 ℃ : approx. 120 s
-40 ℃ : approx. 180 s
*Preparation time may vary depending on the test condition and environment.
Display OLED (128 x 64 pixel)
Memory Store around 500,000 events with date and time
Power supply Input Voltage : Min 8.5V, Max 48V
Demensions
(WxHxD)
Handset : 65 x 135 x 35 mm
Control Box : 140 x 95 x 28 mm
Weight Handset : 120 g
Control Box : 536 g
Calibration Period Every 12 months
Operating temperature -40 ~ 85 ℃
Communication between handset and control box RJ-45
Communication with external devices RS-485

핸드셋 화면 설명

Means that alcohol measurement is possible after the warm-up process is complete.

Means that the measured BAC is below the set criteria or not detected.

Means that the vehicle is in operation after measurement is complete.

Means that the remaining period until the next service.

(Example: 365 days indicates 365 days remaining until the next calibration)

Means that the measured BAC is higher than the set criteria.

(This message is accompanied by an alert sound, and a new measurement can be performed after a certain period.)