페이지 정보
작성자 DATECH 댓글 0건 조회 2,028회 작성일 19-10-11 19:12본문
AF-i1
Ignition Interlock Device
System Diagram
Contents
- ALCOFIND AF-i1 handset
- ALCOFIND AF-i1 control box
- ALCOFIND PC-software
- RJ-45 cable
- Installation wire x 11
- Handset cradle
- Mouthpiece x 10
- Instruction manual
Key Features
- Premium fuel cell sensor
- Advanced features to prevent circumvention
(Sense the temperature, humidity, flow rate, and air volume of breath sample to prevent the manipulation)
(Sense the vehicle engine to prevent the start of vehicle without an accepted test)
(Sense the vehicle voltage to prevent the removal of Interlock system from the vehicle)
- Service and calibration reminder
- Store around 200,000 events with date and time
(The every relevant events that the driver uses with the vehicle are recorded in both of handset and control box)
- Manage and download data, and adjust operation settings through the ALCOFIND software
- Working under extreme conditions
Specification
| Measurement range | 0.000 ~ 0.500 %BAC 0.00 ~ 5.00 ‰ 0.00 ~ 2.50 mg/L |
|---|---|
| Sensor | Premium Fuel Cell Sensor |
| Accuracy | ±0.005 %BAC (at 0.100 %BAC, at 25 ℃) ±0.05 ‰ (at 1.00 ‰, at 25 ℃) ±0.025 mg/L (at 0.50 mg/L, at 25 ℃) |
| Ready to test | 25 ℃ : approx. 1 s -20 ℃ : approx. 120 s -40 ℃ : approx. 180 s *Preparation time may vary depending on the test condition and environment. |
| Display | FND |
| Memory | Store around 200,000 events with date and time |
| Power supply | 12 V or 24 V DC |
| Demensions (WxHxD) |
Handset : 65 x 135 x 35 mm Control Box : 140 x 95 x 28 mm |
| Weight | Handset : 120 g Control Box : 536 g |
| Calibration Period | Every 12 months |
| Operating temperature | -40 ~ 85 ℃ |
| Communication between handset and control box | RJ-45 |
| Communication with external devices | RS-485 |
Key Messages Explained
| - XXXd Shows that the remaining period until the next service. (Example. 173d means 173 days remaining until the next calibration) |
| - tESt Means that the measured BAC is equal to or lower than the set criteria. |
| - PASS Means that the measured BAC is equal to or lower than the set criteria. |
| - FAIL Means that the measured BAC is higher than the set criteria. |
| - ALAr Means that abnormal use is detected. (If the message is displayed, the vehicle must be moved to a safe place, ignition stopped, and may only be driven again according to the instructions provided.) |
